Fj Cruiser Vsc Warning Wont Go Into Gear UPDATED

Fj Cruiser Vsc Warning Wont Go Into Gear

The VSC (Vehicle Stability Control) system is a traction/stability control system designed by Toyota and is used on all of their modern cars and trucks, including the FJ Cruiser.  Like any other electronics system in a vehicle, it tin malfunction.  We'll go over how the VSC system works and what can crusade it to malfunction below.  It is designed to prevent skidding when driving in poor conditions, such equally mud, snowfall, pelting, oily intersection, or anywhere else that traction could exist compromised.

How Does the FJ Cruiser'due south VSC System Work?

The VSC system works by piggybacking off of the FJ Cruiser'south ABS system, which means that if i has a problem, the other 1 usually does too.

Brake Control

The VSC arrangement works by using the bike speed sensors to detect when ane of the wheels is not getting have traction.  It and then applies the brakes to that specific wheel to keep it from spinning.  At the same time, it besides reduces engine power.  This keeps the vehicle from spinning out.

Throttle Control

The VSC organisation has the power to tiresome the engine's rev's downwards.  Otherwise, when it applies the brakes to a slipping bulldoze wheel, the other one would break loose.  This could crusade the FJ Cruiser to crash.  It would too be hard on the driveline components to handle braking at i wheel while accelerating at another.

What Does it Mean When the VSC Light Comes On?

It means that your FJ Cruiser no longer has traction control or stability control.  Your car will still bulldoze ordinarily, it only won't accept this system fix to protect you lot if things go awry.  Bulldoze carefully.

Cheque VSC System Diagnosis:  Toyota FJ Cruiser

There are a number of problems that can cause the "Check VSC" Lite/Error Message to come on.  The most important thing to know is at that place are going to be DTC codes stored in the FJ Cruiser'south computer that will aid yous determine what is going on.

Here are the most likely causes that the VSC Low-cal would stay on:

1. Loose/Bad Fuel Cap

Although it seems similar it would be counterintuitive, a bad/loose gas cap tin can brand the VSC light stay on.  This should be the offset thing that yous check.  Make certain that the cap is seated properly and that the rubber gasket underneath of it is not damaged or cleaved.

2. Bad Wheel Speed Sensor

The wheel speed sensor measures the speed of each wheel and checks information technology against the vehicle speed sensor, as well as each other.  If one of the sensors is sending a signal that is unreliable, the VSS system volition deactivate.

In extreme snow or mud, the wheel speed sensors can get covered enough that they are no longer able to function properly.  When this happens they either need to exist cleaned off, or given enough time for the snow to cook.

3. ABS System Issues

As stated before, the VSC System piggybacks off of the ABS.  A problem with one, will oftentimes pb to a problem with the other.  Not every code scanner is going to be able to pull ABS codes.  Brand sure that you go 1 that tin.  Here'south more on diagnosing ABS issues in your FJ Cruiser.

Can You Drive Your FJ Cruiser With the VSC Light On?

Yes, you can bulldoze with the VSC light on.  Your Toyota FJ Cruiser will run and drive completely normal.  You lot do demand to be aware that the vehicle stability control organisation is an important safety feature.  Ignoring the trouble for a prolonged menstruum of time is not advised.  You tin go for years without needing the VSC organization, simply when you do information technology can salve you lot from wrecking.

When to use VSC Off Push button

VSC is a keen system, but there are certain weather that y'all may be meliorate off with information technology deactivated.  That's why Toyota gives you the option to turn it off.

Here are some weather where your FJ Cruiser'south VSC System may demand to be turned off.

Mud or Snowfall

If at that place is a little snowfall or mud, the VSC system tin can really help keep y'all safe.  We always recommend keeping the system on if your FJ Cruiser is moving in these conditions.  It's when you lot go hung up that the organization may need to be turned off.

If you've ever been hung upwardly in the mud or snowfall, you lot know that rocking the vehicle is the way to become out.  Rocking involves quickly switching from first/drive to reverse in order to "stone" the vehicle out of the mud.  The process involves edifice a momentum using the force of the wheels spinning fast (something the VSC system volition not allow).

VSC Malfunction

If the VSC organization is malfunctioning, turning it off is the only choice there is.  If you find that the engine seems to be down on power compared to normal, and that the brakes almost feel similar they are dragging, that is a strong indication that the VSC organisation is experiencing an error.

Turning information technology off will restore the power and full control of the brake system.

Conclusion

Your VSC calorie-free staying on means that the Toyota FJ Cruiser's VSC system has been deactivated.  It is not equally prophylactic to drive without it on, but it should nevertheless bulldoze fine.  Practiced luck determining what is causing the problem.  Remember, a adept code scanner can salve a ton of time.

DOWNLOAD HERE

Fj Cruiser Vsc Warning Wont Go Into Gear UPDATED

Posted by: davidgove1978.blogspot.com